Paramotor risers EPSILON DLS: dual-use precision
Paramotor risers EPSILON DLS: hybrid risers that convert the EPSILON DLS into a fully certified, dual-use wing for both paramotor and free flying.

Paramotor risers EPSILON DLS: dual-use precision

The Paramotor risers EPSILON DLS from ADVANCE transform the popular EPSILON DLS into a truly versatile wing, certified and optimised both for free flying and powered paragliding. Thanks to hybrid risers with integrated trimmers and foot accelerator, pilots can switch between engine-assisted cruising and classic mountain flights without changing equipment, keeping the familiar EPSILON DLS handling in every configuration.

Designed for stable, accessible paramotor flying

Because of its excellent takeoff behaviour, pronounced stability and compact, damped reactions, the EPSILON DLS is ideally suited for paramotoring. The dedicated hybrid risers are the key: they adapt the wing to the specific demands of powered flight while maintaining the comfort and security that make the EPSILON DLS so popular among progressing cross‑country and recreational pilots.

Hybrid risers with effective trimmers

The Paramotor risers EPSILON DLS are equipped with trimmers that allow the pilot to compensate engine torque and precisely tune cruising speed in flight. Opening or closing the trimmers shifts the wing’s angle of attack, letting you balance asymmetric thrust and choose between efficient climb, relaxed cruise or faster transitions – all without sacrificing the wing’s reassuring character.

Clean conversion for free flying

When you leave the motor on the ground, the system is quickly reconfigured for classic Paragliding. For non‑motorised flight and to retain full EN/LTF paraglider certification, the trimmers must be hooked into the carabiners and fixed. In this setup, the hybrid risers work together with the integrated foot accelerator, giving you the familiar speed range and control of the standard EPSILON DLS while complying with mountain flight regulations.

Certified performance for a wide pilot range

Configured with these hybrid risers, the EPSILON DLS retains its EN/LTF certification as a paraglider and, in sizes 22, 24, 26, 28 and 30, additionally meets DGAC standards for paramotor use. The certified total weight ranges are generous: 55–117 kg (22), 69–137 kg (24), 79–157 kg (26), 91–180 kg (28) and 105–205 kg (30). This allows both lighter and heavier pilots – including those with robust paramotor setups – to find a perfectly matched size.

Article numbers and documentation

The Paramotor risers EPSILON DLS are available under the following article numbers: 11249 for sizes 22/24, 11250 for size 26, and 11251 for sizes 28/30. Detailed technical data, assembly instructions and operating recommendations can be found in the official manual supplied by ADVANCE.

Next step: configure your EPSILON DLS for power

If you already fly an EPSILON DLS or are planning a new, versatile setup, the Paramotor risers EPSILON DLS are a logical upgrade, turning one glider into a dual‑role platform for both powered and free flight. For more detailed specifications and documentation, visit the manufacturer's website. To choose the right size, get practical advice and order your complete equipment package, contact Paragliding4.me – your expert partner for ADVANCE wings and accessories.